Recent Updates
  • Is the ceramic filter plate used correctly?
    1. Correct selection of porous ceramic filter The selection of the porous ceramic filter size and the number of holes must take into account factors such as the flow rate range of the specific casting type, the maximum metal level during filtration, the total filtration volume, and the cleanliness of the original aluminum liquid. 2. The pretreatment of the melt filtration can not be ignored...
    0 Comments 0 Shares
  • Study on Purification of Porous Ceramic Filter
    Ispatguru porous ceramic filter Product Specifications / Specifications Ispatguru porous ceramic filter has the advantages of high porosity, low loss of thermal shock, high mechanical strength at normal and high temperature, large specific surface, good chemical stability and excellent filtering screen functions, filtering collection and adsorption adsorption especially for tiny impurity 1 ~...
    0 Comments 0 Shares
  • Degassing effect of degassing unit
    Aluminium degassing unit With Nitrogen is normally accomplished the use of a rotating impeller deaerator (RID). In fact, now not all rotary deaerators are the equal. it's far essential to have an most suitable head design to produce high efficiency, small bubbles. by using shortening the processing time and lowering the usage of gas, enormous cost savings may be executed.   in the beyond,...
    0 Comments 0 Shares
  • Porous Ceramic Filter Data
    A porous ceramic filter is especially used for the filtration of aluminum and aluminum alloys in foundries and foundries. clean aluminum soften can produce higher great castings, less waste, and less inclusion defects. the porous ceramic clear out has notable resistance to corrosion of molten aluminum, can efficiently take away inclusions, reduce trapped gas in molten aluminum, and provide a...
    0 Comments 0 Shares
  • Porous Ceramic Filter Pore Size
    porous ceramic filter China removes non-metallic inclusions in the aluminum alloy melt and adopts furnace flux treatment. The technology of ceramic foam filtration outside the furnace has long become an important means of purifying molten aluminum. Reflected in the smelting process's alloying, purification, and refinement processing technology. The smelting of aluminum alloy is the first...
    0 Comments 0 Shares
  • Porous Ceramic Filter Pore Size
    porous ceramic filter China removes non-metallic inclusions in the aluminum alloy melt and adopts furnace flux treatment. The technology of ceramic foam filtration outside the furnace has long become an important means of purifying molten aluminum. Reflected in the smelting process's alloying, purification, and refinement processing technology. The smelting of aluminum alloy is the first...
    0 Comments 0 Shares
  • Porous Ceramic Filter zz
    porous ceramic filter can not only effectively remove the bulk heterogeneous impurities in the molten aluminum, but also filter out small inclusions of a few microns that cannot be removed by traditional processes. Since the hydrogen atoms and other harmful ions in the aluminum, the liquid is often adsorbed on the inclusions, and the inclusions can become the core of bubble formation, filtering...
    0 Comments 0 Shares
  • Porous ceramic filter firing
    switch off the heating unit after porous ceramic filter heating is finished. guide inert fuel into the rotor and release molten aluminum into the box when the heater temperature is closed to molten aluminum temperature.   check the sealing among inlet/outlet and launder.   test the cone located in heat protection draining inside the backside.   test the molten aluminum...
    0 Comments 0 Shares
  • Installation of the degassing unit
    Switch off the heating unit after degassing unit heating is completed. Guide inert gas into the rotor and release molten aluminum into the box when the heater temperature is closed to molten aluminum temperature. Check the sealing between inlet/outlet and launder. Check the cone located in heat protection draining in the bottom. Check the molten aluminum temperature (min 720°C). Make the...
    0 Comments 0 Shares
  • Model of degassing unit
    degassing unit are brushed with boron nitride on the surface and are used for aluminum sheet casting. degassing unit for aluminum alloy casting and rolling mill, including fixtures and nozzle parts. The casting nozzle parts are set inside the fixture. There are two sets of casting nozzle parts which are arranged next to each other in the width direction of the fixture, forming a multiple...
    0 Comments 0 Shares
More Stories